+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6014 · 70 × 110 × 20

Deep groove ball · 6014

radial — mediumaxial — low, on both sides
    Drawing of 6014: ⌀70 × ⌀110 × 20 mm6014
    Fig. 1: 6014, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6014

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 6014

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    3 exact, 23 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    20 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 70 × 110 × 20 from other brands

    27 products
    Series illustration (not a photo of this item): 6014
    You are viewing6014

    Everything the number specifies matches: series 60, 70 × 110 × 20 mm, open, no protection, normal clearance, ordinary steel, design without special letters.

    • Series illustration (not a photo of this item): 60146014This bearingno brand70 × 110 × 20available to orderon requestyou are here
    • Series illustration (not a photo of this item): 60146014CT70 × 110 × 20142 pcs€4.79
    • Series illustration (not a photo of this item): 60146014KG70 × 110 × 20available to orderon request
    02

    Often bought with this

    seal 70×110, shaft snap ring Ø70, bore snap ring Ø110

    4 products
    • Seal 70×110JULU 070-110-10 TCWhy it fits: Oil seal 70×110: shaft 70 and housing bore 110, the same as the bearing
      €0.97330 pcs
    • Seal 70×110JULU 070-110-12 TCWhy it fits: Oil seal 70×110: shaft 70 and housing bore 110, the same as the bearing
      €1.05180 pcs
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    4 machines2 makesby parts catalogues

    1. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    2. Belarus 1523/​1523V/​1523.3 Belarus exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    3. Belarus 2022/​2022V (2022.3/​2022V.3) Belarus exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: BELARUS 2022/​2022V. 2022-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. VBP 2160 (baler) Kuhn same geometry 1 assembly · 2 pcs per machine

      ours: open; in the machine: seals on both sides (2RS)

      manufacturer’s catalogue: kuhn_vbp-2160

    Number in the manufacturer’s catalogue: by GOST (114) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 110d 70B 20
    d×D×Bsize 70 × 110 × 20mm

    Deep groove ball bearing 6014. Under GOST the same bearing is designated 114.

    Frequently asked questions

    What is 114?

    It is the same bearing under GOST 3189-89: 114 corresponds to the ISO base 6014. Size 70 × 110 × 20 mm, a full equivalent of 6014.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet