+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6000 2RSC3 · 10 × 26 × 8

Deep groove ball · 6000 2RSC3

radial — mediumaxial — low, on both sides
    Drawing of 6000 2RSC3: ⌀10 × ⌀26 × 8 mm6000 2RSC32RS
    Fig. 1: 6000 2RSC3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6000 2RSC3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 6000 2RSC3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    5 exact, 38 approximate
    d
    10 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    26 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    8 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    C3
    01

    Equivalents

    the same size 10 × 26 × 8 from other brands

    45 products
    Series illustration (not a photo of this item): 6000 2RSC3
    You are viewing6000 2RSC3

    Everything the number specifies matches: series 60, 10 × 26 × 8 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters.

    • Series illustration (not a photo of this item): 6000 2RSC36000 2RSC3This bearingno brand10 × 26 × 8available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6000 2RSRC36000 2RSRC3CT10 × 26 × 8450 pcs€0.22
    • Series illustration (not a photo of this item): 6000 2RS C36000 2RS C3CT10 × 26 × 83,000 pcs€0.28
    • Photo: 6000-2RSH/C36000-2RSH/C3SKF10 × 26 × 8available to order€2.94
    • Series illustration (not a photo of this item): 6000 2RSRC36000 2RSRC3MTM10 × 26 × 8available to orderon request
    02

    Often bought with this

    shaft snap ring Ø10, bore snap ring Ø26, seal 10×26

    3 products
    • Shaft snap ring Ø10CT SEG 10 Z by1000Why it fits: DIN 471 snap ring for a 10 shaft: holds the inner ring on the shaft
      €6.101 pcs
    • Bore snap ring Ø26CT SEG 26 W by 1000Why it fits: DIN 472 snap ring for a 26 bore: holds the outer ring in the housing
      €22.64available to order
    • Seal 10×26JULU 010-26-7 TCWhy it fits: Oil seal 10×26: shaft 10 and housing bore 26, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.181,400 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 26d 10B 8
    d×D×Bsize 10 × 26 × 8mm

    Deep groove ball bearing 6000-2RS C3, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet