+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
4210 2RS · 50 × 90 × 23

Deep groove ball · 4210 2RS

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 4210 2RS: ⌀50 × ⌀90 × 23 mm⌀90⌀50234210 2RS2RS
    Fig. 1: 4210 2RS, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 4210 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 4210 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 11 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 50 × 90 × 23 from other brands

    13 products
    Cross-section drawing to size: Deep groove ball, 50 × 90 × 23 mm
    You are viewing4210 2RS

    Everything the number specifies matches: series 42, 50 × 90 × 23 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters.

    • Cross-section drawing to size: Deep groove ball, 50 × 90 × 23 mm4210 2RSThis bearingno brand50 × 90 × 23available to orderon requestyou are here
    • Cross-section drawing to size: Deep groove ball, 50 × 90 × 23 mm4210 2RSZEN50 × 90 × 23available to orderon request
    02

    Often bought with this

    shaft snap ring Ø50, bore snap ring Ø90, seal 50×90

    5 products
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Bore snap ring Ø90SEG 90 W by 1000Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 50×90JULU 050-90-10 TCWhy it fits: Oil seal 50×90: shaft 50 and housing bore 90, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.73280 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 90d 50B 23
    d×D×Bsize 50 × 90 × 23mm

    Deep groove ball bearing 4210-2RS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet