+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
3203 2RS · 17 × 40 × 17.5

Angular contact ball · 3203 2RS

at an angle — medium, on both sides
    Drawing of 3203 2RS: ⌀17 × ⌀40 × 17.5 mm⌀40⌀1717.53203 2RS2RS
    Fig. 1: 3203 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3203 2RS

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing 3203 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    8 exact, 24 approximate
    d
    17 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    40 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    17.5 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    01

    Equivalents

    the same size 17 × 40 × 17.5 from other brands

    36 products
    Series illustration (not a photo of this item): 3203 2RS
    You are viewing3203 2RS

    Everything the number specifies matches: series 32, 17 × 40 × 17.5 mm, contact seals on both sides, ordinary steel, design without special letters; any contact angle.

    • Series illustration (not a photo of this item): 3203 2RS3203 2RSThis bearingno brand17 × 40 × 17.5available to orderon requestyou are here
    • Photo: 3203 2RS3203 2RSKLT17 × 40 × 17.5available to order€1.63
    • Series illustration (not a photo of this item): 3203 2RS3203 2RSCT17 × 40 × 17.5available to order€1.77
    • Series illustration (not a photo of this item): 3203 2RS3203 2RSNTE17 × 40 × 17.5available to order€2.69
    • Photo: 3203 2RS3203 2RSWBF17 × 40 × 17.5out of stock€4.05
    • Photo: 3203 2RS3203 2RSKBS17 × 40 × 17.5available to order€4.24
    • Series illustration (not a photo of this item): 3203 2RS3203 2RSVBB17 × 40 × 17.5available to orderon request
    • Photo: 3203 2RS3203 2RSZ&S17 × 40 × 17.5available to orderon request
    02

    Often bought with this

    shaft snap ring Ø17, bore snap ring Ø40, seal 17×40

    6 products
    • Shaft snap ring Ø17CT SEG 17 Z by1000Why it fits: DIN 471 snap ring for a 17 shaft: holds the inner ring on the shaft
      €11.51available to order
    • Shaft snap ring Ø17SEG 17 Z by 1000Why it fits: DIN 471 snap ring for a 17 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø40CT SEG 40 W by 1000Why it fits: DIN 472 snap ring for a 40 bore: holds the outer ring in the housing
      €37.06out of stock
    • Bore snap ring Ø40SEG 40 W by 1000Why it fits: DIN 472 snap ring for a 40 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 17×40JULU 017-40-10 TCWhy it fits: Oil seal 17×40: shaft 17 and housing bore 40, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.28630 pcs
    • Seal 17×40JULU 017-40-7 TCWhy it fits: Oil seal 17×40: shaft 17 and housing bore 40, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.281,330 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 40d 17B 17.5
    d×D×Bsize 17 × 40 × 17.5mm

    Angular contact ball bearing 3203-2RS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 3203 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet