+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
30206 A · 30 × 62 × 17.25

Tapered roller · 30206 A

at an angle — high, on one side
    Drawing of 30206 A: ⌀30 × ⌀62 × 17.25 mm⌀62⌀30B 16T 17.25C 14α30206 A
    Fig. 1: 30206 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 30206 A

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing 30206 A

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 8 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    T
    17.25 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    14 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    01

    Equivalents

    the same size 30 × 62 × 17.25 from other brands

    13 products
    Series illustration (not a photo of this item): 30206 A
    You are viewing30206 A

    Everything the number specifies matches: series 302, 30 × 62 × 16 mm, special design.

    • Series illustration (not a photo of this item): 30206 A30206 AThis bearingno brand30 × 62 × 16available to orderon requestyou are here
    • Photo: 30206 A30206 AZ&S30 × 62 × 16available to order€2.82
    02

    Often bought with this

    seal 30×62, shaft snap ring Ø30, bore snap ring Ø62

    5 products
    • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
      €0.39480 pcs
    • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
      €0.401,764 pcs
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    12 machines2 makesby parts catalogues

    1. EurOpal 5 Lemken same geometry 9 assemblies · 15 pcs per machine

      ours has A

      manufacturer’s catalogue: Ersatzteilliste /​ Varaosakirja Lemken EurOpal 5 (Art.Nr./​Stck./​Artikeltext DE-EN)

    2. EurOpal 8 Lemken same geometry 8 assemblies · 14 pcs per machine

      ours has A

      manufacturer’s catalogue: Ersatzteilliste /​ Varaosakirja Lemken EurOpal 8 (Art.Nr./​Stck./​Artikeltext DE-EN)

    3. VariOpal 7 Lemken same geometry 6 assemblies · 10 pcs per machine

      ours has A

      manufacturer’s catalogue: Ersatzteilliste /​ Varaosakirja Lemken VariOpal 7 (Art.Nr./​Stck./​Artikeltext DE-EN)

    4. EuroDiamant 9 Lemken same geometry 5 assemblies · 10 pcs per machine

      ours has A

      manufacturer’s catalogue: Ersatzteilliste /​ Varaosakirja Lemken EuroDiamant 9 (Art.Nr./​Stck./​Artikeltext DE-EN)

    5. VariDiamant 9 Lemken same geometry 3 assemblies · 6 pcs per machine

      ours has A

      manufacturer’s catalogue: Ersatzteilliste /​ Varaosakirja Lemken VariDiamant 9 (Art.Nr./​Stck./​Artikeltext DE-EN)

    Number in the manufacturer’s catalogue: by GOST (7206) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Tsize 30 × 62 × 17.25mm

    Tapered roller bearing 30206. Under GOST the same bearing is designated 7206.

    Frequently asked questions

    What is 7206?

    It is the same bearing under GOST 3189-89: 7206 corresponds to the ISO base 30206. Size 30 × 62 × 17.25 mm, a full equivalent of 30206.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet