+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
22218 CW33 · 90 × 160 × 40

Spherical roller · 22218 CW33

radial — highaxial — medium, on both sides
    Drawing of 22218 CW33: ⌀90 × ⌀160 × 40 mm⌀160⌀904022218 CW33
    Fig. 1: 22218 CW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22218 CW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing 22218 CW33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    4 exact, 37 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    40 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 90 × 160 × 40 from other brands

    41 products
    Series illustration (not a photo of this item): 22218 CW33
    You are viewing22218 CW33

    Everything the number specifies matches: series 222, 90 × 160 × 40 mm, open, no protection, normal clearance, special design.

    • Series illustration (not a photo of this item): 22218 CW3322218 CW33This bearingno brand90 × 160 × 40available to orderon requestyou are here
    • Series illustration (not a photo of this item): 22218 C/W3322218 C/W33CT90 × 160 × 40available to order€18.10
    • Series illustration (not a photo of this item): 22218 CW3322218 CW33KG90 × 160 × 40available to orderon request
    • Series illustration (not a photo of this item): 22218 CW3322218 CW33NTE90 × 160 × 40available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 90 × 160 × 40mm

    Spherical roller bearing 22218. Under GOST the same bearing is designated 53518.

    Frequently asked questions

    What is 53518?

    It is the same bearing under GOST 3189-89: 53518 corresponds to the ISO base 22218. Size 90 × 160 × 40 mm, a full equivalent of 22218.

    Will 22218 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet