+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
16100 ZZ · 10 × 28 × 8

Deep groove ball · 16100 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 16100 ZZ: ⌀10 × ⌀28 × 8 mm16100 ZZZZ
    Fig. 1: 16100 ZZ, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16100 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 16100 ZZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    5 exact, 0 approximate
    d
    10 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    28 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    8 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 10 × 28 × 8 from other brands

    5 products
    Drawing: 16100 ZZ
    You are viewing16100 ZZ

    Everything the number specifies matches: series 161, 10 × 28 × 8 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters.

    • Drawing: 16100 ZZ16100 ZZThis bearingno brand10 × 28 × 8available to orderon requestyou are here
    • Drawing: 16100 ZZ16100 ZZCT10 × 28 × 8available to order€0.35
    • Drawing: 16100 ZZ16100 ZZKG10 × 28 × 8available to orderon request
    • Drawing: 16100-2Z16100-2ZSKF10 × 28 × 8available to orderon request
    • Drawing: 16100 ZZ16100 ZZTIMKEN10 × 28 × 8available to orderon request
    02

    Often bought with this

    shaft snap ring Ø10, bore snap ring Ø28

    2 products
    • Shaft snap ring Ø10CT SEG 10 Z by1000Why it fits: DIN 471 snap ring for a 10 shaft: holds the inner ring on the shaft
      €6.101 pcs
    • Bore snap ring Ø28CT SEG 28 W by 1000Why it fits: DIN 472 snap ring for a 28 bore: holds the outer ring in the housing
      €26.862 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 28d 10B 8
    d×D×Bsize 10 × 28 × 8mm

    Deep groove ball bearing 16100-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80700.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80700?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0700 corresponds to the ISO base 16100. Size 10 × 28 × 8 mm, a full equivalent of 16100-ZZ.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet