+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
16014 2RS · 70 × 110 × 13

Deep groove ball · 16014 2RS

radial — mediumaxial — low, on both sides
    Drawing of 16014 2RS: ⌀70 × ⌀110 × 13 mm16014 2RS2RS
    Fig. 1: 16014 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16014 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 16014 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 6 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    13 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 70 × 110 × 13 from other brands

    8 products
    Drawing: 16014 2RS
    You are viewing16014 2RS

    Everything the number specifies matches: series 160, 70 × 110 × 13 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters.

    • Drawing: 16014 2RS16014 2RSThis bearingno brand70 × 110 × 13available to orderon requestyou are here
    • Drawing: 16014 2RS16014 2RSCT70 × 110 × 136 pcs€5.95
    02

    Often bought with this

    shaft snap ring Ø70, bore snap ring Ø110, seal 70×110

    4 products
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    • Seal 70×110JULU 070-110-10 TCWhy it fits: Oil seal 70×110: shaft 70 and housing bore 110, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.97330 pcs
    • Seal 70×110JULU 070-110-12 TCWhy it fits: Oil seal 70×110: shaft 70 and housing bore 110, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €1.05180 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 110d 70B 13
    d×D×Bsize 70 × 110 × 13mm

    Deep groove ball bearing 16014-2RS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet