+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
16010 · 50 × 80 × 10

Deep groove ball · 16010

radial — mediumaxial — low, on both sides
    Drawing of 16010: ⌀50 × ⌀80 × 10 mm16010
    Fig. 1: 16010, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16010

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 16010

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    4 exact, 5 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    10 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 50 × 80 × 10 from other brands

    9 products
    Series illustration (not a photo of this item): 16010
    You are viewing16010

    Everything the number specifies matches: series 160, 50 × 80 × 10 mm, open, no protection, normal clearance, ordinary steel, design without special letters.

    • Series illustration (not a photo of this item): 1601016010This bearingno brand50 × 80 × 10available to orderon requestyou are here
    • Series illustration (not a photo of this item): 1601016010CT50 × 80 × 10991 pcs€1.45
    • Series illustration (not a photo of this item): 1601016010KG50 × 80 × 10available to orderon request
    • Photo: 1601016010SKF50 × 80 × 10available to orderon request
    02

    Often bought with this

    seal 50×80, shaft snap ring Ø50, bore snap ring Ø80

    6 products
    • Seal 50×80JULU 050-80-10 TCWhy it fits: Oil seal 50×80: shaft 50 and housing bore 80, the same as the bearing
      €0.541,000 pcs
    • Seal 50×80JULU 050-80-8 TCWhy it fits: Oil seal 50×80: shaft 50 and housing bore 80, the same as the bearing
      €0.54700 pcs
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 80d 50B 10
    d×D×Bsize 50 × 80 × 10mm

    Deep groove ball bearing 16010. Under GOST the same bearing is designated 7000110.

    Frequently asked questions

    What is 7000110?

    It is the same bearing under GOST 3189-89: 7000110 corresponds to the ISO base 16010. Size 50 × 80 × 10 mm, a full equivalent of 16010.

    Will 16010 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet