+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1310 K · 50 × 110 × 27

Self-aligning ball · 1310 K

radial — mediumaxial — low, on both sides
    Drawing of 1310 K: ⌀50 × ⌀110 × 27 mm⌀110⌀50271310 K
    Fig. 1: 1310 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1310 K

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing 1310 K

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    3 exact, 11 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    27 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 50 × 110 × 27 from other brands

    16 products
    Series illustration (not a photo of this item): 1310 K
    You are viewing1310 K

    Everything the number specifies matches: series 13, 50 × 110 × 27 mm, open, no protection, K, normal clearance, special design.

    • Series illustration (not a photo of this item): 1310 K1310 KThis bearingno brand50 × 110 × 27available to orderon requestyou are here
    • Photo: 1310 K1310 KZKL50 × 110 × 27available to order€17.52
    • Series illustration (not a photo of this item): 1310 K1310 KCT50 × 110 × 27available to orderon request
    02

    Often bought with this

    adapter sleeve H310, lock nut M50×1.5, lock washer MB10, bore snap ring Ø110

    7 products
    • Adapter sleeve H310CT H 310Why it fits: H310 for 1310 K: 1:12 taper, bore 50 for shaft 45 (Koyo, p. 65)
      €2.0366 pcs
    • Adapter sleeve H310NEU H 310Why it fits: H310 for 1310 K: 1:12 taper, bore 50 for shaft 45 (Koyo, p. 65)
      €4.32available to order
    • Lock nut M50×1.5KM 10Why it fits: KM10 is the nut for sleeve H310: thread M50×1.5
      €0.901 pcs
    • Lock nut M50×1.5CT KM 10Why it fits: KM10 is the nut for sleeve H310: thread M50×1.5
      €1.272,000 pcs
    • Lock washer MB10CT MB 10Why it fits: MB10 locks the KM10 nut (ISO 2982-2)
      €0.211,138 pcs
    • Lock washer MB10ZKL MB 10Why it fits: MB10 locks the KM10 nut (ISO 2982-2)
      €0.25available to order
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 50 × 110 × 27mm

    Self-aligning ball bearing 1310 K.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet