+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1207 K · 35 × 72 × 17

Self-aligning ball · 1207 K

radial — mediumaxial — low, on both sides
    Drawing of 1207 K: ⌀35 × ⌀72 × 17 mm⌀72⌀35171207 K
    Fig. 1: 1207 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1207 K

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing 1207 K

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    4 exact, 13 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    17 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 35 × 72 × 17 from other brands

    21 products
    Series illustration (not a photo of this item): 1207 K
    You are viewing1207 K

    Everything the number specifies matches: series 12, 35 × 72 × 17 mm, open, no protection, K, normal clearance, special design.

    • Series illustration (not a photo of this item): 1207 K1207 KThis bearingno brand35 × 72 × 17available to orderon requestyou are here
    • Series illustration (not a photo of this item): 1207 K1207 KCT35 × 72 × 17available to order€2.31
    • Series illustration (not a photo of this item): 1207 K1207 KKG35 × 72 × 17available to orderon request
    • Series illustration (not a photo of this item): 1207 K1207 KNTE35 × 72 × 17available to orderon request
    02

    Often bought with this

    adapter sleeve H207, lock nut M35×1.5, lock washer MB07, bore snap ring Ø72, seal 30×72

    8 products
    • Adapter sleeve H207CT H 207 with black KMWhy it fits: H207 for 1207 K: 1:12 taper, bore 35 for shaft 30 (Koyo, p. 65)
      €1.22available to order
    • Adapter sleeve H207CT H 207Why it fits: H207 for 1207 K: 1:12 taper, bore 35 for shaft 30 (Koyo, p. 65)
      Price to be confirmedavailable to order
    • Lock nut M35×1.5KM 07Why it fits: KM07 is the nut for sleeve H207: thread M35×1.5
      €0.82available to order
    • Lock nut M35×1.5Z&S KM 7Why it fits: KM07 is the nut for sleeve H207: thread M35×1.5
      €0.98available to order
    • Lock washer MB07CT MB 07Why it fits: MB07 locks the KM07 nut (ISO 2982-2)
      €0.106,655 pcs
    • Lock washer MB07NEU MB 7Why it fits: MB07 locks the KM07 nut (ISO 2982-2)
      €0.17available to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Seal 30×72JULU 030-72-10 TCWhy it fits: Oil seal 30×72: sleeve shaft 30, housing bore for the bearing 72; SN/SNL housings have their own seals, so check against the housing
      €0.392,205 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 35 × 72 × 17mm

    Self-aligning ball bearing 1207 K. Under GOST the same bearing is designated 111207.

    Frequently asked questions

    What is 111207?

    It is the same bearing under GOST 3189-89: 111207 corresponds to the ISO base 1207 K. Size 35 × 72 × 17 mm, a full equivalent of 1207 K.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet