+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1206 · 30 × 62 × 16

Self-aligning ball · 1206

radial — mediumaxial — low, on both sides
    Drawing of 1206: ⌀30 × ⌀62 × 16 mm⌀62⌀30161206
    Fig. 1: 1206, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1206

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing 1206

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    6 exact, 6 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 30 × 62 × 16 from other brands

    15 products
    Series illustration (not a photo of this item): 1206
    You are viewing1206

    Everything the number specifies matches: series 12, 30 × 62 × 16 mm, open, no protection, normal clearance, ordinary steel, design without special letters.

    • Series illustration (not a photo of this item): 12061206This bearingno brand30 × 62 × 16available to orderon requestyou are here
    • Series illustration (not a photo of this item): 12061206CT30 × 62 × 161,011 pcs€1.78
    • Series illustration (not a photo of this item): 12061206NTE30 × 62 × 1690 pcs€2.72
    • Photo: 12061206NEU30 × 62 × 16available to order€2.17
    • Photo: 12061206Z&S30 × 62 × 16available to order€5.41
    • Series illustration (not a photo of this item): 12061206KG30 × 62 × 16available to orderon request
    02

    Often bought with this

    seal 30×62, shaft snap ring Ø30, bore snap ring Ø62

    5 products
    • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
      €0.39480 pcs
    • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
      €0.401,764 pcs
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 30 × 62 × 16mm

    Self-aligning ball bearing 1206. Under GOST the same bearing is designated 1206.

    Frequently asked questions

    What is 1206?

    It is the same bearing under GOST 3189-89: 1206 corresponds to the ISO base 1206. Size 30 × 62 × 16 mm, a full equivalent of 1206.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet