Classic V-belt, profile D
V-belt Mitsuboshi D250
Price on request
Available to order
Specifications
- Manufacturer part number
- L
- 250″ Length LLength in inches, the number in the part number. Whether the manufacturer means the inside or the outside length, check in its catalogue. Source: part no. D250
- wd
- 27 mm Pitch width wdBelt width at the neutral line. It equals the pitch width of the D pulley groove: the belt and the pulley fit each other by it. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), tables 7 and 14; DIN 2215
- b
- 32 mm Top width bWidth of the belt back. Use it to check the profile of an old belt with calipers. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), tables 7 and 14; DIN 2215
- h
- 20 mm Height hHeight of the section from the back to the bottom face of the wedge. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), tables 7 and 14; DIN 2215
- m
- 4.127 kg Mass mMass of one piece according to the supplier. Source: supplier