+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Fenner/TOP DRIVE
SPC · Ld 5300 mm

There is no photo of this belt: the cross-section drawing of SPC to DIN 7753-1 / ISO 4184 is shown

Narrow V-belt, profile SPC

V-belt Fenner/TOP DRIVE SPC 5300

Price on request
Available to order
Request a quote

Specifications

Manufacturer part number
Equivalents
1 exact
Ld
5300 mm
Pitch length LdLength along the neutral line of the belt, this is the number in the part number. DIN catalogues call it Lw; the value is the same. Source: part no. SPC 5300, DIN 7753-1 / ISO 4184
La
5330 mm
Outside length LaLength along the back of the belt, the one a tape measure gives. For profile SPC it is 30 mm longer than the pitch length. Source: Optibelt Technical Manual V-Belt Drives
wd
19 mm
Pitch width wdBelt width at the neutral line. It equals the pitch width of the SPC pulley groove: the belt and the pulley fit each other by it. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), table 5 (SK), table 14; DIN 7753-1 / ISO 4184
Design
plainno X in the part number
b
22 mm
Top width bWidth of the belt back. Use it to check the profile of an old belt with calipers. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), table 5 (SK), table 14; DIN 7753-1 / ISO 4184
h
18 mm
Height hHeight of the section from the back to the bottom face of the wedge. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), table 5 (SK), table 14; DIN 7753-1 / ISO 4184
m
1.844 kg
Mass mMass of one piece according to the supplier. Source: supplier

Equivalents

same profile SPC and length 5300 from other brands

1 product
You are viewingFenner/TOP DRIVE SPC 5300

Same part number SPC 5300: profile SPC, pitch length 5300 mm.in stock 0 of 2

  • SPC 5300This beltFenner/TOP DRIVESPC · 5300available to orderon requestyou are here
  • SPC 5300ContiTechSPC · 5300available to orderon requestRequest a quote

Delivery, payment, questions

About the belt

b 22h 18
b×hsection 22 × 18mm
Ldpitch length 5300mm
wdpitch width 19mm
mmass 1.844kg

Narrow V-belt of profile SPC with a pitch length of 5300 mm. Section 22 × 18 mm, pitch width 19 mm: the belt sits in the SPC pulley groove by it. Mass 1.844 kg.

Why you can rely on us

Frequently asked questions

What do Ld, Lw and La mean?

Ld and Lw are the pitch length along the neutral line: ISO writes Ld, DIN writes Lw, the number is the same. La is the outside length along the back; for SPC it is 30 mm more. This belt has Ld 5300 mm and La 5330 mm.

Can I fit SPCX or XPC 5300?

The size and groove are the same; a belt with the letter X has a cogged underside and bends more easily on small pulleys. You can fit it, but belts of one drive should be of one brand and one design.

How do I measure an old belt if the number has worn off?

The top width of SPC is 22 mm and the height is 18 mm. A tape measure along the back gives the outside length La; subtract 30 mm to get the number in the part number.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.