Classic V-belt, profile B
V-belt Fenner/TOP DRIVE 17/B 3000
Price on request
Available to order
Specifications
- Manufacturer part number
- Equivalents
- 4 exact, 1 with a different design
- L
- 3000 mm Length LThe length number from the part number. For classic belts some manufacturers give the inside length Li, others the pitch length Ld; check the brand catalogue. Source: part no. 17/B 3000
- wd
- 14 mm Pitch width wdBelt width at the neutral line. It equals the pitch width of the B pulley groove: the belt and the pulley fit each other by it. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), tables 7 and 14; Mädler K44: 17×11; DIN 2215
- b
- 17 mm Top width bWidth of the belt back. Use it to check the profile of an old belt with calipers. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), tables 7 and 14; Mädler K44: 17×11; DIN 2215
- h
- 11 mm Height hHeight of the section from the back to the bottom face of the wedge. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), tables 7 and 14; Mädler K44: 17×11; DIN 2215
- m
- 0.51 kg Mass mMass of one piece according to the supplier. Source: supplier
