+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices in euros, VAT included
ENDURA
SPC · Ld 3150 mm

There is no photo of this belt: the cross-section drawing of SPC to DIN 7753-1 / ISO 4184 is shown

Narrow V-belt, profile SPC

V-belt ENDURA SPC 3150

€14.31per piece
Available to orderDelivery time is confirmed by a manager
Request a quote

Specifications

Manufacturer part number
Equivalents
5 exact, 4 with a different design
Ld
3150 mm
Pitch length LdLength along the neutral line of the belt, this is the number in the part number. DIN catalogues call it Lw; the value is the same. Source: part no. SPC 3150, DIN 7753-1 / ISO 4184
La
3180 mm
Outside length LaLength along the back of the belt, the one a tape measure gives. For profile SPC it is 30 mm longer than the pitch length. Source: Optibelt Technical Manual V-Belt Drives
wd
19 mm
Pitch width wdBelt width at the neutral line. It equals the pitch width of the SPC pulley groove: the belt and the pulley fit each other by it. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), table 5 (SK), table 14; DIN 7753-1 / ISO 4184
Design
plainno X in the part number
b
22 mm
Top width bWidth of the belt back. Use it to check the profile of an old belt with calipers. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), table 5 (SK), table 14; DIN 7753-1 / ISO 4184
h
18 mm
Height hHeight of the section from the back to the bottom face of the wedge. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), table 5 (SK), table 14; DIN 7753-1 / ISO 4184
m
1.197 kg
Mass mMass of one piece according to the supplier. Source: supplier

Equivalents

same profile SPC and length 3150 from other brands

9 products
You are viewingENDURA SPC 3150
€14.31base for the price comparison

Same part number SPC 3150: profile SPC, pitch length 3150 mm.in stock 1 of 6

Below the price: the difference from the price of this belt (€14.31).

Delivery, payment, questions

About the belt

b 22h 18
b×hsection 22 × 18mm
Ldpitch length 3150mm
wdpitch width 19mm
mmass 1.197kg

Narrow V-belt of profile SPC with a pitch length of 3150 mm. Section 22 × 18 mm, pitch width 19 mm: the belt sits in the SPC pulley groove by it. Mass 1.197 kg.

Why you can rely on us

Frequently asked questions

What do Ld, Lw and La mean?

Ld and Lw are the pitch length along the neutral line: ISO writes Ld, DIN writes Lw, the number is the same. La is the outside length along the back; for SPC it is 30 mm more. This belt has Ld 3150 mm and La 3180 mm.

Can I fit SPCX or XPC 3150?

The size and groove are the same; a belt with the letter X has a cogged underside and bends more easily on small pulleys. You can fit it, but belts of one drive should be of one brand and one design.

How do I measure an old belt if the number has worn off?

The top width of SPC is 22 mm and the height is 18 mm. A tape measure along the back gives the outside length La; subtract 30 mm to get the number in the part number.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.