+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
ENDURA
SPB · Ld 2150 mm

There is no photo of this belt: the cross-section drawing of SPB to DIN 7753-1 / ISO 4184 is shown

Narrow V-belt, profile SPB

V-belt ENDURA SPB 2150

Price on request
Available to order
Request a quote

Specifications

Manufacturer part number
Equivalents
0 exact, 4 with a different design
Ld
2150 mm
Pitch length LdLength along the neutral line of the belt, this is the number in the part number. DIN catalogues call it Lw; the value is the same. Source: part no. SPB 2150, DIN 7753-1 / ISO 4184
La
2172 mm
Outside length LaLength along the back of the belt, the one a tape measure gives. For profile SPB it is 22 mm longer than the pitch length. Source: Optibelt Technical Manual V-Belt Drives
wd
14 mm
Pitch width wdBelt width at the neutral line. It equals the pitch width of the SPB pulley groove: the belt and the pulley fit each other by it. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), table 5 (SK), table 14; DIN 7753-1 / ISO 4184
Design
plainno X in the part number
b
16.3 mm
Top width bWidth of the belt back. Use it to check the profile of an old belt with calipers. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), table 5 (SK), table 14; DIN 7753-1 / ISO 4184
h
13 mm
Height hHeight of the section from the back to the bottom face of the wedge. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), table 5 (SK), table 14; DIN 7753-1 / ISO 4184
m
0.38 kg
Mass mMass of one piece according to the supplier. Source: supplier

Equivalents

same profile SPB and length 2150 from other brands

4 products
You are viewingENDURA SPB 2150

Same size and groove, different design: the difference is written in the row.in stock 0 of 1

Delivery, payment, questions

About the belt

b 16.3h 13
b×hsection 16.3 × 13mm
Ldpitch length 2150mm
wdpitch width 14mm
mmass 0.38kg

Narrow V-belt of profile SPB with a pitch length of 2150 mm. Section 16.3 × 13 mm, pitch width 14 mm: the belt sits in the SPB pulley groove by it. Mass 0.38 kg.

Why you can rely on us

Frequently asked questions

What do Ld, Lw and La mean?

Ld and Lw are the pitch length along the neutral line: ISO writes Ld, DIN writes Lw, the number is the same. La is the outside length along the back; for SPB it is 22 mm more. This belt has Ld 2150 mm and La 2172 mm.

Can I fit SPBX or XPB 2150?

The size and groove are the same; a belt with the letter X has a cogged underside and bends more easily on small pulleys. You can fit it, but belts of one drive should be of one brand and one design.

How do I measure an old belt if the number has worn off?

The top width of SPB is 16.3 mm and the height is 13 mm. A tape measure along the back gives the outside length La; subtract 22 mm to get the number in the part number.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.