Classic V-belt, profile E
V-belt CT belt E 5600
Price on request
Available to order
Specifications
- Manufacturer part number
- Equivalents
- 1 exact
- L
- 5600 mm Length LThe length number from the part number. For classic belts some manufacturers give the inside length Li, others the pitch length Ld; check the brand catalogue. Source: part no. E 5600
- wd
- 32 mm Pitch width wdBelt width at the neutral line. It equals the pitch width of the E pulley groove: the belt and the pulley fit each other by it. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), tables 7 and 14; DIN 2215
- b
- 40 mm Top width bWidth of the belt back. Use it to check the profile of an old belt with calipers. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), tables 7 and 14; DIN 2215
- h
- 25 mm Height hHeight of the section from the back to the bottom face of the wedge. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), tables 7 and 14; DIN 2215
- m
- 4.956 kg Mass mMass of one piece according to the supplier. Source: supplier
