+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
ContiTech
SPZ · Ld 1500 mm

There is no photo of this belt: the cross-section drawing of SPZ to DIN 7753-1 / ISO 4184 is shown

Narrow V-belt, profile SPZ

V-belt ContiTech SPZ 1500

Price on request
Available to order
Request a quote

Specifications

Manufacturer part number
Equivalents
2 exact, 3 with a different design
Ld
1500 mm
Pitch length LdLength along the neutral line of the belt, this is the number in the part number. DIN catalogues call it Lw; the value is the same. Source: part no. SPZ 1500, DIN 7753-1 / ISO 4184
La
1513 mm
Outside length LaLength along the back of the belt, the one a tape measure gives. For profile SPZ it is 13 mm longer than the pitch length. Source: Optibelt Technical Manual V-Belt Drives
wd
8.5 mm
Pitch width wdBelt width at the neutral line. It equals the pitch width of the SPZ pulley groove: the belt and the pulley fit each other by it. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), table 5 (SK), table 14; DIN 7753-1 / ISO 4184
Design
plainno X in the part number
b
9.7 mm
Top width bWidth of the belt back. Use it to check the profile of an old belt with calipers. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), table 5 (SK), table 14; DIN 7753-1 / ISO 4184
h
8 mm
Height hHeight of the section from the back to the bottom face of the wedge. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), table 5 (SK), table 14; DIN 7753-1 / ISO 4184
m
0.115 kg
Mass mMass of one piece according to the supplier. Source: supplier

Equivalents

same profile SPZ and length 1500 from other brands

5 products
You are viewingContiTech SPZ 1500

Same part number SPZ 1500: profile SPZ, pitch length 1500 mm.in stock 0 of 3

Delivery, payment, questions

About the belt

b 9.7h 8
b×hsection 9.7 × 8mm
Ldpitch length 1500mm
wdpitch width 8.5mm
mmass 0.115kg

Narrow V-belt of profile SPZ with a pitch length of 1500 mm. Section 9.7 × 8 mm, pitch width 8.5 mm: the belt sits in the SPZ pulley groove by it. Mass 0.115 kg.

Why you can rely on us

Frequently asked questions

What do Ld, Lw and La mean?

Ld and Lw are the pitch length along the neutral line: ISO writes Ld, DIN writes Lw, the number is the same. La is the outside length along the back; for SPZ it is 13 mm more. This belt has Ld 1500 mm and La 1513 mm.

Can I fit SPZX or XPZ 1500?

The size and groove are the same; a belt with the letter X has a cogged underside and bends more easily on small pulleys. You can fit it, but belts of one drive should be of one brand and one design.

How do I measure an old belt if the number has worn off?

The top width of SPZ is 9.7 mm and the height is 8 mm. A tape measure along the back gives the outside length La; subtract 13 mm to get the number in the part number.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.