Classic cogged V-belt, profile A
Cogged V-belt ContiTech AX 66 1676Li/1706 Ld L=L
Price on request
Available to order
Specifications
- Manufacturer part number
- Ld
- 1706 mm Pitch length LdLength along the neutral line of the belt; the manufacturer gives it in the part number. Source: part no. AX 66 1676Li/1706 Ld L=L, DIN 2215 / ISO 4184
- wd
- 11 mm Pitch width wdBelt width at the neutral line. It equals the pitch width of the A pulley groove: the belt and the pulley fit each other by it. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), tables 7 and 14; Mädler K44: 13×8; DIN 2215
- b
- 13 mm Top width bWidth of the belt back. Use it to check the profile of an old belt with calipers. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), tables 7 and 14; Mädler K44: 13×8; DIN 2215
- h
- 8 mm Height hHeight of the section from the back to the bottom face of the wedge. Source: Optibelt Technical Manual V-Belt Drives (allworldmachinery.com/customer/docs/OPTIBELT_TECH_MANUAL_V-BELTS.pdf), tables 7 and 14; Mädler K44: 13×8; DIN 2215
- m
- 0.176 kg Mass mMass of one piece according to the supplier. Source: supplier