+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NJ 228 E: ⌀140 × ⌀250 × 42 mm⌀250⌀14042NJ 228 E
Fig. 1: NJ 228 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 228 E

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing ZVL NJ 228 E

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 13 approximate
d
140 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
250 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
42 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 140 × 250 × 42 from other brands

15 products
Series illustration (not a photo of this item): NJ 228 E
You are viewingZVL NJ 228 E

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller N, 140 × 250 × 42 mmN 228different designCT140 × 250 × 42available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 140 × 250 × 42 mmNU228different designCT140 × 250 × 42available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 140 × 250 × 42 mmN228EME, MDYZV140 × 250 × 42available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 140 × 250 × 42 mmNU 228 E-M1A-C3clearance C3, E, M1AFAG140 × 250 × 42available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 140 × 250 × 42 mmNU 228 E-XL-M1E, M1, XLFAG140 × 250 × 42available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 140 × 250 × 42 mmNU 228-E-XL-M1-C3clearance C3, E, M1, XLFAG140 × 250 × 42available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 140 × 250 × 42 mmN 228 MMKG140 × 250 × 42available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 140 × 250 × 42 mmNU 228 MMKG140 × 250 × 42available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 140 × 250 × 42 mmNJ 228 ECJ/C3clearance C3, reinforced design EC, pressed steel cageSKF140 × 250 × 42available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU 228 ECJ/C3NU 228 ECJ/C3clearance C3, reinforced design EC, pressed steel cageSKF140 × 250 × 42available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 140 × 250 × 42mm

Cylindrical roller NJ bearing NJ 228 E.

Frequently asked questions

Will 228 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet