+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NUP 210: ⌀50 × ⌀90 × 20 mm⌀90⌀5020NUP 210
Fig. 1: NUP 210, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NUP 210

Load: radial high; axial low, on both sidesCylindrical roller NUP

Bearing ZKL NUP 210

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
OEM number
511.04.530
Equivalents
5 exact, 34 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
90 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
20 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.55 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 50 × 90 × 20 from other brands

42 products
Cross-section drawing to size: Cylindrical roller NUP, 50 × 90 × 20 mm
You are viewingZKL NUP 210

Size and design match across the brand catalogues. The codes in the number are read against the ZKL catalogue.

  • Cross-section drawing to size: Cylindrical roller NUP, 50 × 90 × 20 mmNUP 210This bearingZKL50 × 90 × 20out of stockon requestyou are here
  • Photo: NUP 210 ENNUP 210 ENZ&S50 × 90 × 20available to order€10.87Request a quote
  • Photo: NUP 210 ENUP 210 EZ&S50 × 90 × 20available to order€11.99Request a quote
  • Cross-section drawing to size: Cylindrical roller NUP, 50 × 90 × 20 mmNUP 210 ECJSKF50 × 90 × 20available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NUP, 50 × 90 × 20 mmNUP 210 ECPSKF50 × 90 × 20available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 50 × 90 × 20mm
mweight 0.55kg

Cylindrical roller NUP bearing NUP 210.

M: ZKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 210 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet