+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 7213: ⌀65 × ⌀120 × 23 mm⌀120⌀65237213
Fig. 1: 7213, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7213

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing ZKL 7213

€37.85per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
2 exact, 8 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
120 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
23 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
C
112 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
136 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
01

Equivalents

the same size 65 × 120 × 23 from other brands

11 products
Photo: 7213
You are viewingZKL 7213
€37.85baseline for the price comparison

Everything the number specifies matches: series 72, 65 × 120 × 23 mm, open, no protection, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the ZKL catalogue.

  • Photo: 72137213This bearingZKL65 × 120 × 23available to order€37.85you are here
  • Photo: 72137213GPZ65 × 120 × 23available to order€29.61−€8.24Request a quote

Under the price: the difference from the price of this bearing (€37.85).
02

Details

what this bearing is, questions

About the bearing

D 120d 65B 23
d×D×Bsize 65 × 120 × 23mm
Cdynamic 112kN
C0static 136kN

Angular contact ball bearing 7213.

C, C₀: ZKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet