+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6312 ZZ: ⌀60 × ⌀130 × 31 mm6312 ZZZZ
Fig. 1: 6312 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6312 ZZ

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing ZKL 6312 ZZ

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
7 exact, 38 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
31 mm
Width BRing width. Source: two supplier sources
Seal
ZZshields, both sides
Clearance
normal clearance
m
1.7 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 60 × 130 × 31 from other brands

46 products
Series illustration (not a photo of this item): 6312 ZZ
You are viewingZKL 6312 ZZ

Everything the number specifies matches: series 63, 60 × 130 × 31 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the ZKL catalogue.
02

Details

what this bearing is, questions

About the bearing

D 130d 60B 31
d×D×Bsize 60 × 130 × 31mm
mweight 1.7kg

Deep groove ball bearing 6312-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80312.

M: ZKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 80312?

It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0312 corresponds to the ISO base 6312. Size 60 × 130 × 31 mm, a full equivalent of 6312-ZZ.

Will 6312 ZZ C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet