+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 1218 K: ⌀90 × ⌀160 × 30 mm⌀160⌀90301218 K
Fig. 1: 1218 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1218 K

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing ZKL 1218 K

€59.24per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
4 exact, 3 approximate
d
90 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
30 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
1.1 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 90 × 160 × 30 from other brands

9 products
Photo: 1218 K
You are viewingZKL 1218 K
€59.24baseline for the price comparison

Everything the number specifies matches: series 12, 90 × 160 × 30 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the ZKL catalogue.

  • Photo: 1218 K1218 KThis bearingZKL90 × 160 × 30available to order€59.24you are here
  • Photo: 1218 K1218 KGPZ90 × 160 × 30available to order€34.56−€24.68Request a quote
  • Series illustration (not a photo of this item): 1218 K1218 Kno brand90 × 160 × 30available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1218 K1218 KNTE90 × 160 × 30available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€59.24).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 90 × 160 × 30mm
mweight 1.1kg

Self-aligning ball bearing 1218 K. Under GOST the same bearing is designated 111218.

M: ZKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 111218?

It is the same bearing under GOST 3189-89: 111218 corresponds to the ISO base 1218 K. Size 90 × 160 × 30 mm, a full equivalent of 1218 K.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet