+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
ZEN
Drawing of 16007 2RS: ⌀35 × ⌀62 × 9 mm16007 2RS2RS
Fig. 1: 16007 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 16007 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing ZEN 16007 2RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 14 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
9 mm
Width BRing width. Source: supplier data
Seal
2RSrubber, both sides
Clearance
normal clearance
C0
6.6 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
Limiting speed
9,500 rpm
Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
m
0.11 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 35 × 62 × 9 from other brands

18 products
Drawing: 16007 2RS
You are viewingZEN 16007 2RS

Everything the number specifies matches: series 160, 35 × 62 × 9 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the ZEN catalogue.
02

Details

what this bearing is, questions

About the bearing

D 62d 35B 9
d×D×Bsize 35 × 62 × 9mm
C0static 6.6kN
mweight 0.11kg

Deep groove ball bearing 16007-2RS, design 2RS: contact seals on both sides.

C₀, m and limiting speed 9,500 rpm: ZEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet