+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of R8 2RS: ⌀12.7 × ⌀28.575 × 7.94 mm⌀28.575⌀12.77.94R8 2RS2RS
Fig. 1: R8 2RS, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of R8 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing Z&S R8 2RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 0 approximate
d
12.7 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
28.575 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
7.94 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
01

Equivalents

the same size 12.7 × 28.575 × 7.94 from other brands

3 products
Photo: R8 2RS
You are viewingZ&S R8 2RS

Not enough data for a firm conclusion: what is missing is written in the row.

  • Cross-section drawing to size: Deep groove ball, 12.7 × 28.575 × 7.94 mmR 8 2RSR, 8: not decodedCT12.7 × 28.575 × 7.94304 pcs€0.26Request a quote
  • Cross-section drawing to size: Deep groove ball, 12.7 × 28.575 × 7.94 mmR8 2RSR8: not decodedWBW12.7 × 28.575 × 7.94out of stockon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 28.575d 12.7B 7.94
d×D×Bsize 12.7 × 28.575 × 7.94mm

Deep groove ball bearing R8 2RS, design 2RS: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet