+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NUP 309 N: ⌀45 × ⌀100 × 25 mm⌀100⌀4525NUP 309 N
Fig. 1: NUP 309 N, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NUP 309 N

Load: radial high; axial low, on both sidesCylindrical roller NUP

Bearing Z&S NUP 309 N

€16.96per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
OEM number
45 RT 03
Equivalents
5 exact, 37 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
100 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
25 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.95 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 45 × 100 × 25 from other brands

43 products
Photo: NUP 309 N
You are viewingZ&S NUP 309 N
€16.96baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the Z&S catalogue.

  • Photo: NUP 309 NNUP 309 NThis bearingZ&S45 × 100 × 25available to order€16.96you are here
  • Photo: NUP 309NUP 309Z&S45 × 100 × 25available to order€12.92−€4.04Request a quote
  • Photo: NUP 309NUP 309FAG45 × 100 × 25available to order€80.62+€63.66Request a quote
  • Cross-section drawing to size: Cylindrical roller NUP, 45 × 100 × 25 mmNUP 309CT45 × 100 × 25available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NUP309NNUP309NCT45 × 100 × 25available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€16.96).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 45 × 100 × 25mm
mweight 0.95kg

Cylindrical roller NUP bearing NUP 309 N.

M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 309 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet