+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NJ 307 E: ⌀35 × ⌀80 × 21 mm⌀80⌀3521NJ 307 E
Fig. 1: NJ 307 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
Bearing Z&S NJ 307 E — photo 1
Bearing Z&S NJ 307 E — photo 2
Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing Z&S NJ 307 E

€13.52per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
OEM number
35 RJ 03
Equivalents
3 exact, 40 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
21 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C0
63 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.55 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 35 × 80 × 21 from other brands

47 products
Photo: NJ 307 E
You are viewingZ&S NJ 307 E
€13.52baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the Z&S catalogue.

  • Photo: NJ 307 ENJ 307 EThis bearingZ&S35 × 80 × 21available to order€13.52you are here
  • Series illustration (not a photo of this item): NJ 307 ENJ 307 ECT35 × 80 × 2165 pcs€3.30−€10.22Request a quote
  • Series illustration (not a photo of this item): NJ 307 ENJ 307 ENTE35 × 80 × 21available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€13.52).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 35 × 80 × 21mm
C0static 63kN
mweight 0.55kg

Cylindrical roller NJ bearing NJ 307 E.

C₀, m: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 307 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet