+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Simplified drawing of the bearing per ISO 8826-1, dimensions of 7815: ⌀75 × ⌀135 × 45 mm⌀135⌀75457815
Fig. 1: 7815, simplified drawing per ISO 8826-1. Dimensions in mm
Bearing Z&S 7815 — photo 1
Bearing Z&S 7815 — photo 2
Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing Z&S 7815

€22.27per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
3 exact, 0 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
135 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
45 mm
Width BRing width. Source: supplier data
Cup width C
36.5 mm
Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
m
2.57 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 75 × 135 × 45 from other brands

3 products
Photo: 7815
You are viewingZ&S 7815
€22.27baseline for the price comparison

Everything the number specifies matches: series 78, 75 × 135 × 45 mm, ordinary steel, design without special letters. The codes in the number are read against the Z&S catalogue.

  • Photo: 78157815This bearingZ&S75 × 135 × 45available to order€22.27you are here
  • Cross-section drawing to size: Tapered roller, 75 × 135 × T 44.25 mm7815CT75 × 135 × ?available to order€8.94−€13.33Request a quote
  • Type diagram, no dimensions: bearing7815KG75 × 135 × ?available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€22.27).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 75 × 135 × 45mm
mweight 2.57kg

Tapered roller bearing 7815.

M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet