+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 698 2RS: ⌀8 × ⌀19 × 6 mm698 2RS2RS
Fig. 1: 698 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 698 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing Z&S 698 2RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
4 exact, 0 approximate
d
8 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
19 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
6 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
normal clearance
m
0.007 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 8 × 19 × 6 from other brands

4 products
Photo: 698 2RS
You are viewingZ&S 698 2RS

Everything the number specifies matches: ordinary steel, design without special letters. The codes in the number are read against the Z&S catalogue.
02

Details

what this bearing is, questions

About the bearing

D 19d 8B 6
d×D×Bsize 8 × 19 × 6mm
mweight 0.007kg

Deep groove ball bearing 698-2RS, design 2RS: contact seals on both sides.

M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet