+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 62204 2RS: ⌀20 × ⌀47 × 18 mm62204 2RS2RS
Fig. 1: 62204 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 62204 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing Z&S 62204 2RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
6 exact, 9 approximate
d
20 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
47 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
18 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
normal clearance
C0
12.7 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
Limiting speed
10,000 rpm
Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
m
0.14 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 20 × 47 × 18 from other brands

18 products
Photo: 62204 2RS
You are viewingZ&S 62204 2RS

Everything the number specifies matches: series 622, 20 × 47 × 18 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the Z&S catalogue.
02

Details

what this bearing is, questions

About the bearing

D 47d 20B 18
d×D×Bsize 20 × 47 × 18mm
C0static 12.7kN
mweight 0.14kg

Deep groove ball bearing 62204-2RS, design 2RS: contact seals on both sides.

C₀, m and limiting speed 10,000 rpm: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Will 62204 2RS C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet