+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6010 P6: ⌀50 × ⌀80 × 16 mm6010 P6
Fig. 1: 6010 P6, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6010 P6

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing Z&S 6010 P6

€4.77per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
OEM number
532.23.620
Equivalents
1 exact, 32 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
16 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
22.9 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
Limiting speed
9,800 rpm
Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
m
0.26 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 50 × 80 × 16 from other brands

34 products
Photo: 6010 P6
You are viewingZ&S 6010 P6
€4.77baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 6010 2RS6010 2RScontact seals on both sides, precision class P0CT50 × 80 × 161,754 pcs€1.57−€3.20Request a quote
  • Series illustration (not a photo of this item): 6010 2RS6010 2RScontact seals on both sides, precision class P0NTE50 × 80 × 1659 pcs€2.04−€2.73Request a quote
  • Drawing: SS 6010 2RSSS 6010 2RScontact seals on both sides, precision class P0, stainless steelCT50 × 80 × 16280 pcs€6.12+€1.35Request a quote
  • Series illustration (not a photo of this item): 6010 2RS6010 2RScontact seals on both sides, precision class P0Koyo50 × 80 × 1623 pcs€8.63+€3.86Request a quote
  • Photo: 6010 2RS6010 2RScontact seals on both sides, precision class P0Z&S50 × 80 × 16available to order€4.18−€0.59Request a quote
  • Photo: 6010-2RS16010-2RS1contact seals on both sides, precision class P0SKF50 × 80 × 16available to order€10.08+€5.31Request a quote
  • Photo: 6010-2RS1/C36010-2RS1/C3contact seals on both sides, clearance C3, precision class P0SKF50 × 80 × 16available to order€10.08+€5.31Request a quote
  • Photo: 6010 2RS6010 2RScontact seals on both sides, precision class P0TIMKEN50 × 80 × 16available to order€16.61+€11.84Request a quote
  • Photo: 6010 2RS6010 2RScontact seals on both sides, precision class P0NEU50 × 80 × 16available to order€20.14+€15.37Request a quote
  • Series illustration (not a photo of this item): 6010 2RS6010 2RScontact seals on both sides, precision class P0no brand50 × 80 × 16available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€4.77).
02

Details

what this bearing is, questions

About the bearing

D 80d 50B 16
d×D×Bsize 50 × 80 × 16mm
Cdynamic 22.9kN
mweight 0.26kg

Deep groove ball bearing 6010. Under GOST the same bearing is designated 110.

C, m and limiting speed 9,800 rpm: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 110?

It is the same bearing under GOST 3189-89: 110 corresponds to the ISO base 6010. Size 50 × 80 × 16 mm, a full equivalent of 6010.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet