+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 4206: ⌀30 × ⌀62 × 20 mm4206
Fig. 1: 4206, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 4206

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing Z&S 4206

€6.66per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
2 exact, 15 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
20 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.261 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 30 × 62 × 20 from other brands

17 products
Photo: 4206
You are viewingZ&S 4206
€6.66baseline for the price comparison

Everything the number specifies matches: series 42, 30 × 62 × 20 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the Z&S catalogue.

  • Photo: 42064206This bearingZ&S30 × 62 × 20available to order€6.66you are here
  • Cross-section drawing to size: Deep groove ball, 30 × 62 × 20 mm4206CT30 × 62 × 20600 pcson requestRequest a quote

Under the price: the difference from the price of this bearing (€6.66).
02

Details

what this bearing is, questions

About the bearing

D 62d 30B 20
d×D×Bsize 30 × 62 × 20mm
mweight 0.261kg

Deep groove ball bearing 4206.

M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet