+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 382A: ⌀57.15 × ⌀93.638 × 21 mm⌀93.638⌀57.15T 21C 15.875α382A
Fig. 1: 382A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 382A

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing Z&S 382A

€8.68per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 0 approximate
d
57.15 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
T
21 mm
Total width TOverall width of an assembled tapered roller bearing. Source: two supplier sources
Cup width C
15.875 mm
Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
D
93.638 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
m
0.178 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 57.15 × 93.638 × 21 from other brands

2 products
Photo: 382A
You are viewingZ&S 382A
€8.68baseline for the price comparison

Everything the number specifies matches: special design. The codes in the number are read against the Z&S catalogue.

  • Photo: 382A382AThis bearingZ&S57.15 × 93.638 × ?available to order€8.68you are here
  • Photo: 382A382ANTN57.15 × 93.638 × ?available to order€21.65+€12.97Request a quote

Under the price: the difference from the price of this bearing (€8.68).
02

Details

what this bearing is, questions

About the bearing

d×D×Tsize 57.15 × 93.638 × 21mm
mweight 0.178kg

Tapered roller bearing 382.

M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet