+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 33208 A: ⌀40 × ⌀80 × 32 mm⌀80⌀40B 32T 32C 25α33208 A
Fig. 1: 33208 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 33208 A

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing WBW 33208 A

€11.99per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 4 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
32 mm
Width BRing width. Source: supplier data
T
32 mm
Total width TOverall width of an assembled tapered roller bearing. Source: two supplier sources
Cup width C
25 mm
Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
m
0.741 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 40 × 80 × 32 from other brands

7 products
Photo: 33208 A
You are viewingWBW 33208 A
€11.99baseline for the price comparison

Everything the number specifies matches: series 332, 40 × 80 × 32 mm, special design. The codes in the number are read against the WBW catalogue.

  • Photo: 33208 A33208 AThis bearingWBW40 × 80 × 32available to order€11.99you are here
  • Photo: 33208 A33208 AZ&S40 × 80 × 32available to order€7.45−€4.54Request a quote

Under the price: the difference from the price of this bearing (€11.99).
02

Details

what this bearing is, questions

About the bearing

d×D×Tsize 40 × 80 × 32mm
mweight 0.741kg

Tapered roller bearing 33208.

M: WBW data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet