+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
WBF
Drawing of 62/28 2RS: ⌀28 × ⌀58 × 16 mm62/28 2RS2RS
Fig. 1: 62/28 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 62/28 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing WBF 62/28 2RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 2 approximate
d
28 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
58 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
16 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
normal clearance
m
0.173 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 28 × 58 × 16 from other brands

5 products
Photo: 62/28 2RS
You are viewingWBF 62/28 2RS

Everything the number specifies matches: series 62/, 28 × 58 × 16 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the WBF catalogue.

  • Photo: 62/28 2RS62/28 2RSThis bearingWBF28 × 58 × 16out of stockon requestyou are here
  • Series illustration (not a photo of this item): 62/28 2RS62/28 2RSKoyo28 × 58 × 1615 pcs€6.96Request a quote
02

Details

what this bearing is, questions

About the bearing

D 58d 28B 16
d×D×Bsize 28 × 58 × 16mm
mweight 0.173kg

Deep groove ball bearing 62/28-2RS, design 2RS: contact seals on both sides.

M: WBF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Will 62/28 2RS C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet