+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
UTL
Drawing of NU 209: ⌀45 × ⌀85 × 19 mm⌀85⌀4519NU 209
Fig. 1: NU 209, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 209

Load: radial high; no axial loadCylindrical roller NU

Bearing UTL NU 209

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
9 exact, 23 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
85 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
19 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 45 × 85 × 19 from other brands

34 products
Cross-section drawing to size: Cylindrical roller NU, 45 × 85 × 19 mm
You are viewingUTL NU 209

Size and design match across the brand catalogues. The codes in the number are read against the UTL catalogue.
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 45 × 85 × 19mm

Cylindrical roller NU bearing NU 209.

Frequently asked questions

Will 209 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet