+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
UTL
Drawing of NJ 2308: ⌀40 × ⌀90 × 33 mm⌀90⌀4033NJ 2308
Fig. 1: NJ 2308, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 2308

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing UTL NJ 2308

€34.96per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
OEM number
40 RJ 23
Equivalents
5 exact, 12 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
90 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
33 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.978 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 40 × 90 × 33 from other brands

17 products
Photo: NJ 2308
You are viewingUTL NJ 2308
€34.96baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the UTL catalogue.

  • Photo: NJ 2308NJ 2308This bearingUTL40 × 90 × 33available to order€34.96you are here
  • Cross-section drawing to size: Cylindrical roller NJ, 40 × 90 × 33 mmNJ 2308CT40 × 90 × 334 pcs€5.07−€29.89Request a quote
  • Photo: NJ 2308 ENJ 2308 EZ&S40 × 90 × 33available to order€14.38−€20.58Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 40 × 90 × 33 mmNJ2308ET *5NSK40 × 90 × 33available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 40 × 90 × 33 mmNJ 2308 ECJSKF40 × 90 × 33available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€34.96).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 40 × 90 × 33mm
mweight 0.978kg

Cylindrical roller NJ bearing NJ 2308.

M: UTL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 2308 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet