+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
UTL
Drawing of NJ 205: ⌀25 × ⌀52 × 15 mm⌀52⌀2515NJ 205
Fig. 1: NJ 205, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 205

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing UTL NJ 205

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
11 exact, 25 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
52 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
15 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.13 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 25 × 52 × 15 from other brands

37 products
Cross-section drawing to size: Cylindrical roller NJ, 25 × 52 × 15 mm
You are viewingUTL NJ 205

Size and design match across the brand catalogues. The codes in the number are read against the UTL catalogue.

  • Cross-section drawing to size: Cylindrical roller NJ, 25 × 52 × 15 mmNJ 205This bearingUTL25 × 52 × 15out of stockon requestyou are here
  • Cross-section drawing to size: Cylindrical roller NJ, 25 × 52 × 15 mmNJ 205CT25 × 52 × 1558 pcs€1.77Request a quote
  • Photo: NJ 205 ENJ 205 EZ&S25 × 52 × 15available to order€6.21Request a quote
  • Photo: NJ 205NJ 205FAG25 × 52 × 15available to order€22.90Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 25 × 52 × 15 mmNJ 205DKF25 × 52 × 15out of stockon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 25 × 52 × 15 mmNJ205-E-XL-M1FAG25 × 52 × 15available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 25 × 52 × 15 mmNJ 205KG25 × 52 × 15available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 25 × 52 × 15 mmNJ205ET *5NSK25 × 52 × 15available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ 205 ENJ 205 ENTE25 × 52 × 15available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ 205 ECPNJ 205 ECPSKF25 × 52 × 15available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 25 × 52 × 15mm
mweight 0.13kg

Cylindrical roller NJ bearing NJ 205.

M: UTL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 205 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet