+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NUP 307 E: ⌀35 × ⌀80 × 21 mm⌀80⌀3521NUP 307 E
Fig. 1: NUP 307 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NUP 307 E

Load: radial high; axial low, on both sidesCylindrical roller NUP

Bearing URB NUP 307 E

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
OEM number
35 RT 03, 619.57.060
Equivalents
4 exact, 42 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
21 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.57 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 35 × 80 × 21 from other brands

47 products
Series illustration (not a photo of this item): NUP 307 E
You are viewingURB NUP 307 E

Size and design match across the brand catalogues. The codes in the number are read against the URB catalogue.
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 35 × 80 × 21mm
mweight 0.57kg

Cylindrical roller NUP bearing NUP 307 E.

M: URB data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 307 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet