+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6308 NR C3: ⌀40 × ⌀90 × 23 mm⌀90⌀40236308 NR C3
Fig. 1: 6308 NR C3, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6308 NR C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing TIMKEN 6308 NR C3

€24.68per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 80 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
90 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
23 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
C3
m
0.63 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 40 × 90 × 23 from other brands

82 products
Photo: 6308 NR C3
You are viewingTIMKEN 6308 NR C3
€24.68baseline for the price comparison

Everything the number specifies matches: series 63, 40 × 90 × 23 mm, open, no protection, NR, clearance C3, special design. The codes in the number are read against the TIMKEN catalogue.

  • Photo: 6308 NR C36308 NR C3This bearingTIMKEN40 × 90 × 23available to order€24.68you are here
  • Series illustration (not a photo of this item): 6308 NRC36308 NRC3KG40 × 90 × 23available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€24.68).
02

Details

what this bearing is, questions

About the bearing

D 90d 40B 23
d×D×Bsize 40 × 90 × 23mm
mweight 0.63kg

Deep groove ball bearing 6308 C3.

M: TIMKEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet