+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6204 2RS C3: ⌀20 × ⌀47 × 14 mm6204 2RS C32RS
Fig. 1: 6204 2RS C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6204 2RS C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing TIMKEN 6204 2RS C3

€2.79per piece
In stock: 769 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
9 exact, 105 approximate
d
20 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
47 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
14 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
C3
C
12.774 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
6.553 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 20 × 47 × 14 from other brands

117 products
Photo: 6204 2RS C3
You are viewingTIMKEN 6204 2RS C3
€2.79baseline for the price comparison

Everything the number specifies matches: series 62, 20 × 47 × 14 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the TIMKEN catalogue.

Under the price: the difference from the price of this bearing (€2.79).
02

Details

what this bearing is, questions

About the bearing

D 47d 20B 14
d×D×Bsize 20 × 47 × 14mm
Cdynamic 12.774kN
C0static 6.553kN

Deep groove ball bearing 6204-2RS C3, design 2RS: contact seals on both sides.

C, C₀: TIMKEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet