+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6201 2RS C3: ⌀12 × ⌀32 × 10 mm6201 2RS C32RS
Fig. 1: 6201 2RS C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6201 2RS C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing TIMKEN 6201 2RS C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
9 exact, 54 approximate
d
12 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
32 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
10 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
C3
m
0.037 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 12 × 32 × 10 from other brands

63 products
Photo: 6201 2RS C3
You are viewingTIMKEN 6201 2RS C3

Everything the number specifies matches: series 62, 12 × 32 × 10 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the TIMKEN catalogue.
02

Details

what this bearing is, questions

About the bearing

D 32d 12B 10
d×D×Bsize 12 × 32 × 10mm
mweight 0.037kg

Deep groove ball bearing 6201-2RS C3, design 2RS: contact seals on both sides.

M: TIMKEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet