+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 609 ZZ C3: ⌀9 × ⌀24 × 7 mm609 ZZ C3ZZ
Fig. 1: 609 ZZ C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 609 ZZ C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing TIMKEN 609 ZZ C3

€2.30per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
d
9 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
24 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
7 mm
Width BRing width. Source: two supplier sources
Seal
ZZshields, both sides
Clearance
C3
C
3.4 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
1.4 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.012 kg
MassWeight of the product. Source: two supplier sources
01

Details

what this bearing is, questions

About the bearing

D 24d 9B 7
d×D×Bsize 9 × 24 × 7mm
Cdynamic 3.4kN
C0static 1.4kN
mweight 0.012kg

Deep groove ball bearing 609-ZZ C3, design ZZ: metal shields on both sides.

C, C₀, m: TIMKEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

02

Reviews

No reviews yet