+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6009 NR 2RS: ⌀45 × ⌀75 × 16 mm⌀75⌀45166009 NR 2RS2RS
Fig. 1: 6009 NR 2RS, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6009 NR 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing TIMKEN 6009 NR 2RS

€24.93per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
OEM number
532.01.080
Equivalents
2 exact, 46 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
75 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
16 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
normal clearance
m
0.25 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 45 × 75 × 16 from other brands

48 products
Photo: 6009 NR 2RS
You are viewingTIMKEN 6009 NR 2RS
€24.93baseline for the price comparison

Everything the number specifies matches: series 60, 45 × 75 × 16 mm, contact seals on both sides, NR, normal clearance, special design. The codes in the number are read against the TIMKEN catalogue.

  • Photo: 6009 NR 2RS6009 NR 2RSThis bearingTIMKEN45 × 75 × 16available to order€24.93you are here
  • Series illustration (not a photo of this item): 6009 DDU NR6009 DDU NRNSK45 × 75 × 16available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€24.93).
02

Details

what this bearing is, questions

About the bearing

D 75d 45B 16
d×D×Bsize 45 × 75 × 16mm
mweight 0.25kg

Deep groove ball bearing 6009-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180109.

M: TIMKEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 180109?

It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0109 corresponds to the ISO base 6009. Size 45 × 75 × 16 mm, a full equivalent of 6009-2RS.

Will 6009 2RS C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet