+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 33212: ⌀60 × ⌀110 × 38 mm⌀110⌀60B 38T 38C 29α33212
Fig. 1: 33212, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 33212

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing TIMKEN 33212

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
4 exact, 1 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
38 mm
Width BRing width. Source: supplier data
T
38 mm
Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
Cup width C
29 mm
Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
01

Equivalents

the same size 60 × 110 × 38 from other brands

7 products
Series illustration (not a photo of this item): 33212
You are viewingTIMKEN 33212

Everything the number specifies matches: series 332, 60 × 110 × 38 mm, ordinary steel, design without special letters. The codes in the number are read against the TIMKEN catalogue.

  • Series illustration (not a photo of this item): 3321233212This bearingTIMKEN60 × 110 × 38available to orderon requestyou are here
  • Series illustration (not a photo of this item): 3321233212CT60 × 110 × 3818 pcs€5.31Request a quote
  • Series illustration (not a photo of this item): 3321233212FAG60 × 110 × 38available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 3321233212NTE60 × 110 × 38available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Tsize 60 × 110 × 38mm

Tapered roller bearing 33212. Under GOST the same bearing is designated 3007212.

Frequently asked questions

What is 3007212?

It is the same bearing under GOST 3189-89: 3007212 corresponds to the ISO base 33212. Size 60 × 110 × 38 mm, a full equivalent of 33212.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet