+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 31312: ⌀60 × ⌀130 × 33.5 mm⌀130⌀60T 33.5α31312
Fig. 1: 31312, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 31312

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing TIMKEN 31312

€54.30per piece
In stock: 3 pcs
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
3 exact, 11 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
T
33.5 mm
Total width TOverall width of an assembled tapered roller bearing. Source: two supplier sources
01

Equivalents

the same size 60 × 130 × 33.5 from other brands

15 products
Photo: 31312
You are viewingTIMKEN 31312
€54.30baseline for the price comparison

Everything the number specifies matches: series 313, 60 × 130 mm, ordinary steel, design without special letters. The codes in the number are read against the TIMKEN catalogue.

  • Photo: 3131231312This bearingTIMKEN60 × 130 × ?3 pcs€54.30you are here
  • Cross-section drawing to size: Tapered roller, 60 × 130 × T 33.5 mm31312CT60 × 130 × ?22 pcs€6.97−€47.33Request a quote
  • Cross-section drawing to size: Tapered roller, 60 × 130 × T 33.5 mm31312NTE60 × 130 × ?available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€54.30).
02

Details

what this bearing is, questions

About the bearing

d×D×Tsize 60 × 130 × 33.5mm

Tapered roller bearing 31312. Under GOST the same bearing is designated 27312.

Frequently asked questions

What is 27312?

It is the same bearing under GOST 3189-89: 27312 corresponds to the ISO base 31312. Size 60 × 130 × 33.5 mm, a full equivalent of 31312.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet