+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
SPZ-GROUP
Simplified drawing of the bearing per ISO 8826-1, dimensions of 2007115: ⌀75 × ⌀115 mm⌀115⌀752007115
Fig. 1: 2007115, simplified drawing per ISO 8826-1; width not specified — outline drawn to the proportions of the type; GOST number = ISO 32015 X, dimensions from the GOST↔ISO table CX p.767. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2007115

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing SPZ-GROUP 2007115

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
5 exact, 6 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
115 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
01

Equivalents

the same size 75 × 115 from other brands

13 products
Type diagram, no dimensions: bearing
You are viewingSPZ-GROUP 2007115

Everything the number specifies matches: series 20071, 75 × 115 mm, ordinary steel, design without special letters. The codes in the number are read against the SPZ-GROUP catalogue.

  • Type diagram, no dimensions: bearing2007115This bearingSPZ-GROUP75 × 115 × ?available to orderon requestyou are here
  • Series illustration (not a photo of this item): 3201532015CT75 × 115 × 25194 pcs€3.95Request a quote
  • Series illustration (not a photo of this item): 3201532015NTE75 × 115 × 2528 pcs€5.66Request a quote
  • Series illustration (not a photo of this item): 3201532015no brand75 × 115 × 25available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 3201532015KG75 × 115 × 25available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 75 × 115mm

Tapered roller bearing 2007115.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet