+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6009 ZZ C3: ⌀45 × ⌀75 × 16 mm6009 ZZ C3ZZ
Fig. 1: 6009 ZZ C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6009 ZZ C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SNR 6009 ZZ C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 45 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
75 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
16 mm
Width BRing width. Source: two supplier sources
Seal
ZZshields, both sides
Clearance
C3
m
0.25 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 45 × 75 × 16 from other brands

48 products
Series illustration (not a photo of this item): 6009 ZZ C3
You are viewingNTN/SNR 6009 ZZ C3

Everything the number specifies matches: series 60, 45 × 75 × 16 mm, metal shields on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the NTN/SNR catalogue.

  • Series illustration (not a photo of this item): 6009 ZZ C36009 ZZ C3This bearingNTN/SNR45 × 75 × 16out of stockon requestyou are here
  • Series illustration (not a photo of this item): 6009 2Z/C36009 2Z/C3SKF45 × 75 × 16available to order€7.91Request a quote
  • Series illustration (not a photo of this item): 6009 ZZC36009 ZZC3KG45 × 75 × 16available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 75d 45B 16
d×D×Bsize 45 × 75 × 16mm
mweight 0.25kg

Deep groove ball bearing 6009-ZZ C3, design ZZ: metal shields on both sides.

M: NTN/SNR data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet